|
SCI-PCI adapters can be configured as cluster transport adapters. These adapters can be used with transport types dlpi and rsm.
The adapter name is sciN, for example, sci0. Do not use scidN as the adapter name.
An sci adapter can only be connected to another sci adapter or to an SCI switch. When an sci adapter is connected to an SCI switch, it is important that you specify the correct port name when referring to a port on the switch as an endpoint
argument to the scconf(1M) or scinstall(1M) utility. The port name must match the port number on the SCI switch (the number printed on the switch itself). Failure to give the correct port name could result in the scconf or scinstall utility failing. The result
of providing an incorrect port name will be the same as you would see if the cable between the adapter and the switch were removed.
There are no user-configurable properties for cluster transport adapters of this type.
|
