|
|||
|
 |
|
  |
|
  |
|
| ||||||||||||||||
|
# vxprint -g diskgroup |
Run the scstat(1M)
command to see which node has the disk group currently imported, indicating
it is the primary node for the disk group.# scstat -D
| -D | Shows the status for all disk device groups. |
Create a snapshot of the volume using the vxassist
command. # vxassist -g diskgroup snapstart volume
Note - Creating a snapshot can take a long time depending on the size of your volume.
Verify the new volume was created.# vxprint -g diskgroup
When the snapshot is complete, a status of Snapdone displays in the State field for the selected disk group.
Stop any data services that are accessing the file system.# scswitch -z -g resource-group[,...] -h ""
Note - Stop all data services to ensure that the data file system is properly backed up. If no data services are running, you do not need to perform Step 6 and Step 8.
Create a backup volume named bkup-vol and attach
the snapshot volume to it using the vxassist command.# vxassist -g diskgroup snapshot volume bkup-vol
Restart any data services that were stopped in Step 6,
using the scswitch(1M)
command.# scswitch -z -g resource-group[,...] -h node[,...]
Verify the volume is now attached to the new volume bkup-vol using the vxprint command.# vxprint -g diskgroup
Register the disk group configuration change.# scconf -c -D name=diskgroup,sync
Check the backup volume using the fsck command.# fsck -y /dev/vx/rdsk/diskgroup/bkup-vol
Perform a backup to copy the volume bkup-vol to tape or another medium.
Use the ufsdump(1M) command or the backup utility you normally use.
# ufsdump 0ucf dump-device /dev/vx/dsk/diskgroup/bkup-vol |
Remove the temporary volume using vxedit.# vxedit -rf rm bkup-vol
Register the disk group configuration changes using the scconf(1M) command.# scconf -c -D name=diskgroup,sync
In the following example, the cluster node phys-schost-2 is the primary owner of the metaset disk group schost-1, therefore the backup procedure is performed from phys-schost-2. The volume /vo101 is copied and then associated with a new volume, bkup-vol.
[Become superuser on the primary node.]
[Identify the current primary node for the disk group:]
# scstat -D
-- Device Group Servers --
Device Group Primary Secondary
------------ ------- ---------
Device group servers: rmt/1 - -
Device group servers: schost-1 phys-schost-2 phys-schost-1
-- Device Group Status --
Device Group Status
------------ ------
Device group status: rmt/1 Offline
Device group status: schost-1 Online
[List the disk group information:]
# vxprint -g schost-1
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0
dg schost-1 schost-1 - - - - - -
dm schost-101 c1t1d0s2 - 17678493 - - - -
dm schost-102 c1t2d0s2 - 17678493 - - - -
dm schost-103 c2t1d0s2 - 8378640 - - - -
dm schost-104 c2t2d0s2 - 17678493 - - - -
dm schost-105 c1t3d0s2 - 17678493 - - - -
dm schost-106 c2t3d0s2 - 17678493 - - - -
v vol01 gen ENABLED 204800 - ACTIVE - -
pl vol01-01 vol01 ENABLED 208331 - ACTIVE - -
sd schost-101-01 vol01-01 ENABLED 104139 0 - - -
sd schost-102-01 vol01-01 ENABLED 104139 0 - - -
pl vol01-02 vol01 ENABLED 208331 - ACTIVE - -
sd schost-103-01 vol01-02 ENABLED 103680 0 - - -
sd schost-104-01 vol01-02 ENABLED 104139 0 - - -
pl vol01-03 vol01 ENABLED LOGONLY - ACTIVE - -
sd schost-103-02 vol01-03 ENABLED 5 LOG - - -
[Start the snapshot operation:]
# vxassist -g schost-1 snapstart vol01
[Verify the new volume was created:]
# vxprint -g schost-1
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0
dg schost-1 schost-1 - - - - - -
dm schost-101 c1t1d0s2 - 17678493 - - - -
dm schost-102 c1t2d0s2 - 17678493 - - - -
dm schost-103 c2t1d0s2 - 8378640 - - - -
dm schost-104 c2t2d0s2 - 17678493 - - - -
dm schost-105 c1t3d0s2 - 17678493 - - - -
dm schost-106 c2t3d0s2 - 17678493 - - - -
v vol01 gen ENABLED 204800 - ACTIVE - -
pl vol01-01 vol01 ENABLED 208331 - ACTIVE - -
sd schost-101-01 vol01-01 ENABLED 104139 0 - - -
sd schost-102-01 vol01-01 ENABLED 104139 0 - - -
pl vol01-02 vol01 ENABLED 208331 - ACTIVE - -
sd schost-103-01 vol01-02 ENABLED 103680 0 - - -
sd schost-104-01 vol01-02 ENABLED 104139 0 - - -
pl vol01-03 vol01 ENABLED LOGONLY - ACTIVE - -
sd schost-103-02 vol01-03 ENABLED 5 LOG - - -
pl vol01-04 vol01 ENABLED 208331 - SNAPDONE - -
sd schost-105-01 vol01-04 ENABLED 104139 0 - - -
sd schost-106-01 vol01-04 ENABLED 104139 0 - - -
[Stop data services, if necessary:]
# scswitch -z -g nfs-rg -h ""
[Create a copy of the volume:]
# vxassist -g schost-1 snapshot vol01 bkup-vol
[Restart data services, if necessary:]
# scswitch -z -g nfs-rg -h phys-schost-1
[Verify bkup-vol was created:]
# vxprint -g schost-1
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0
dg schost-1 schost-1 - - - - - -
dm schost-101 c1t1d0s2 - 17678493 - - - -
...
v bkup-vol gen ENABLED 204800 - ACTIVE - -
pl bkup-vol-01 bkup-vol ENABLED 208331 - ACTIVE - -
sd schost-105-01 bkup-vol-01 ENABLED 104139 0 - - -
sd schost-106-01 bkup-vol-01 ENABLED 104139 0 - - -
v vol01 gen ENABLED 204800 - ACTIVE - -
pl vol01-01 vol01 ENABLED 208331 - ACTIVE - -
sd schost-101-01 vol01-01 ENABLED 104139 0 - - -
sd schost-102-01 vol01-01 ENABLED 104139 0 - - -
pl vol01-02 vol01 ENABLED 208331 - ACTIVE - -
sd schost-103-01 vol01-02 ENABLED 103680 0 - - -
sd schost-104-01 vol01-02 ENABLED 104139 0 - - -
pl vol01-03 vol01 ENABLED LOGONLY - ACTIVE - -
sd schost-103-02 vol01-03 ENABLED 5 LOG - - -
[Synchronize the disk group with cluster framework:]
# scconf -c -D name=schost-1,sync
[Check the file systems:]
# fsck -y /dev/vx/rdsk/schost-1/bkup-vol
[Copy bkup-vol to the backup device:]
# ufsdump 0ucf /dev/rmt/0 /dev/vx/rdsk/schost-1/bkup-vol
DUMP: Writing 63 Kilobyte records
DUMP: Date of this level 0 dump: Tue Apr 25 16:15:51 2000
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/vx/dsk/schost-2/bkup-vol to /dev/rmt/0.
...
DUMP: DUMP IS DONE
[Remove the bkup-volume:]
# vxedit -rf rm bkup-vol
[Synchronize the disk group:]
# scconf -c -D name=schost-1,sync
|
 Previous Contents Index Next  |
SPARC: How to Perform Online Backups for Volumes (VERITAS Volume Manager)